Everything that goes on and around the product is yours to define: the logo and how it is applied, the shell colour and finish, the mould itself, the retail box, the manual and the barcode. Below is what we can actually run — with the trade-offs that decide which method fits your quantity and price point.
Printing, moulding and packaging are carried out at our long-term manufacturing partner’s plant in Guangdong. Every customisation is approved by you on a physical sample before the mass run starts.
| Silk-screen printing | Ink pushed through a fine mesh stencil onto the housing. Best for: 1–4 spot colours, flat or gently curved shells, high volume · Sharp, opaque, most cost-effective at volume |
|---|---|
| UV printing | UV-cured ink jetted onto the surface, no stencil needed. Best for: Full-colour artwork, gradients, photographic detail, curved shells · Vivid colour, no plate cost, ideal for low MOQ |
| Laser engraving | A laser removes a thin layer of material — no ink at all. Best for: Aluminium, alloy and matte plastics · Permanent, tactile, premium finish |
| Pad printing | A silicone pad picks up ink and transfers it to an uneven surface. Best for: Small logos, tight recessed areas, contoured edges · Precise on shapes screen printing cannot reach |
| In-mould decoration | The graphic is placed in the mould and fuses with the plastic. Best for: Premium shells needing scratch-proof, wear-proof artwork · Graphic becomes part of the part — cannot rub off |
| Heat transfer | A printed film is heat-pressed onto the surface. Best for: Full-wrap graphics, complex multicolour patterns · Economical full-surface decoration |
| Water transfer printing | A floating film wraps complex 3D geometry. Best for: Curved and irregular shells, pattern finishes · Covers shapes ink cannot reach |
| Sprayed finish | Rubbed, matte or soft-touch coating over the moulded shell. Best for: Whole-surface colour and texture · Colour matching, soft-touch, dual-tone, gradient |
| Anodising | Electrochemical finish for aluminium shells. Best for: Aluminium housings · Durable colour, brushed or satin metal look |
Not sure which one? Send the artwork and the target quantity — we will recommend the method that holds the best cost/quality balance for that run.
Choose from the 81 catalogue models — no tooling cost, fastest route to market.
Port layout, display window, cable slot or colour change on an existing tool.
From your 3D drawing or sketch: DFM review, 3D-printed prototype, then tooling and T1 samples.
Pantone matching, matte or gloss, soft-touch, dual-tone and gradient finishes.
Printed carton with your brand, specs, barcode and legal marks.
Rigid magnetic-closure box for premium positioning.
Die-cut window so buyers see the product on shelf.
For retail chains and supermarket pegboard.
Recycled board for eco-positioned brands.
Low-cost branding for accessories and clip strips.
Paper, EVA or moulded pulp to hold the product and cable.
Multilingual manual, QR code, FBA / retail barcode labels.
Send the model, target market, quantity and your artwork or idea.
We confirm the configuration and quote — usually within 24 hours.
We send the dieline and a digital proof of logo and packaging.
A sample with your branding is built in 5–7 days and shipped with photos.
You approve the sample; any change is applied before tooling or mass run.
3–5 days up to 3,000 pcs, 5–7 days up to 10,000 pcs, larger runs on plan.
100% functional test, then export packing with the documentation set.
Port mix, PD/PPS/QC support, wireless coil and output priority set for your market.
LED indicator, digital percentage, TFT colour screen or clock display.
Built-in or bundled cable (USB-A / USB-C / Lightning), pouch, carabiner, lanyard.
Multilingual manual, compliance documentation set and shipping marks to your spec.
Send your artwork and target quantity — you get a quotation and a printed proof before anything is tooled.
Request a quote